Audio And Visual System (W/O Navigation System) Cellular Phone Voice Circuit Between Radio Receiver And Stereo Component Amplifier

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER)

AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Cellular Phone Voice Circuit between Radio Receiver and Stereo Component Amplifier


DESCRIPTION

This circuit is used when an incoming cellular phone voice in the "Bluetooth" handsfree system is received.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Audio And Visual System (W/O Navigation System) Cellular Phone Voice Circuit Between Radio Receiver And Stereo Component Amplifier


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER)

  1. Disconnect the F19 radio receiver assembly and F18 stereo component amplifier assembly connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F19-11 (IVO+) - F18-15 (II1+)
    		Always
    		Below 1 Ω
    F19-12 (IVO-) - F18-14 (II1-)
    		Always
    		Below 1 Ω
    F19-11 (IVO+) - Body ground
    		Always
    		10 kΩ or higher
    F19-12 (IVO-) - Body ground
    		Always
    		10 kΩ or higher
    F19-13 (SLD1) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)