Audio And Visual System (W/ Navigation System) Display Signal Circuit Between Multi-Display And Radio Receiver

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK DIGITAL COMMUNICATION CABLE CONNECTOR

CHECK MULTI-DISPLAY ASSEMBLY

AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Display Signal Circuit between Multi-display and Radio Receiver


DESCRIPTION

The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a digital communication cable.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Audio And Visual System (W/ Navigation System) Display Signal Circuit Between Multi-Display And Radio Receiver


INSPECTION PROCEDURE

1.CHECK DIGITAL COMMUNICATION CABLE CONNECTOR

  1. Check if the digital communication cable connectors between the multi-media module receiver assembly and the multi-display assembly have any connection problems (Click here).

  1. Check that the screen display is normal.

    OK:
    Screen display is normal.


NG
Go to step 2
OK

USE SIMULATION METHOD TO CHECK (Click here)

2.CHECK MULTI-DISPLAY ASSEMBLY

  1. Replace the multi-display assembly with a new or normally functioning one (Click here).

  1. Check that the screen display is normal.

    OK:
    Screen display is normal.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)