Audio And Visual System (W/ Navigation System) How To Proceed With Troubleshooting

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. DIAGNOSTIC QUESTIONING AND SYMPTOM CONFIRMATION

  4. OPERATION CHECK

  5. CHECK CAN COMMUNICATION SYSTEM*

  6. CHECK FOR DTC*

  7. CLEAR DTC*

  8. RECHECK FOR DTC*

  9. DIAGNOSTIC TROUBLE CODE CHART

  10. CHECK HARD DISK DRIVE

  11. PROBLEM SYMPTOMS TABLE

  12. PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

  13. CHECK CIRCUIT

  14. RECHECK FOR DIAGNOSTIC TROUBLE CODE

  15. PERFORM CONFIRMATION TEST

Audio And Visual System (W/ Navigation System) -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedure to troubleshoot the audio and visual system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage with the engine switch off.

      Standard voltage:
      11 to 14 V
      1. If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    NEXT


    3.DIAGNOSTIC QUESTIONING AND SYMPTOM CONFIRMATION

    1. Ask the customer about symptoms and confirm malfunctions.

      Result
      Result
      		Proceed to
      Other symptoms occurred.
      		A
      The screen displays nothing.
      		B



    		B.
    Go to step 6
    A


    4.OPERATION CHECK

    1. Refer to Check System Normal Condition (Click here).

      Result
      Result
      		Proceed to
      Symptom is not normal operation.
      		A
      Symptom is normal operation.
      		B



    		B.
    SYMPTOM IS NORMAL OPERATION
    A


    5.CHECK CAN COMMUNICATION SYSTEM*

    1. Check for DTC output (Click here).

      Result
      Result
      		Proceed to
      CAN DTCs are not output.
      		A
      CAN DTCs are output (for LHD).
      		B
      CAN DTCs are output (for RHD).
      		C



    		B.
    GO TO CAN COMMUNICATION SYSTEM (Click here)

    		C.
    GO TO CAN COMMUNICATION SYSTEM (Click here)
    A


    6.CHECK FOR DTC*

    1. Refer to DTC Check/Clear (Click here).

      Result
      Result
      		Proceed to
      DTCs are output.
      		A
      DTCs are not output.
      (The multi-display assembly displays content.)
      		B
      DTCs are not output.
      (The multi-display assembly does not display anything.)
      		C

      HINT:
      If more information is needed, perform a check using the "System Check Mode" screen after checking for DTCs using the intelligent tester.


    		B.
    Go to step 10

    		C.
    Go to step 11
    A


    7.CLEAR DTC*

    1. Refer to DTC Check/Clear (Click here).

      HINT:
      The present DTCs may not indicate actual malfunctions depending on the vehicle operating conditions.

    NEXT


    8.RECHECK FOR DTC*

    1. Refer to DTC Check/Clear (Click here).

      Result
      Result
      		Proceed to
      DTCs are output.
      		A
      DTCs are not output.
      		B

      HINT:
      1. Even if the malfunction symptom is not confirmed, check for DTCs. This is because the system stores history DTCs.
      2. If more information is needed, perform a recheck using the "System Check Mode" screen after rechecking for DTCs using the intelligent tester.
      3. Check the DTCs and inspect the area that the code indicates.


    		B.
    Go to step 10
    A


    9.DIAGNOSTIC TROUBLE CODE CHART

    1. Find the output code in Diagnostic Trouble Code Chart (Click here).

      NOTICE:
      1. The audio and visual system (w/ Navigation System) outputs DTCs for the following system.
      2. When DTCs other than those in Diagnostic Trouble Code Chart for the audio and visual system (w/ Navigation System) are output, refer to Diagnostic Trouble Code Chart for the relevant system.
      3. Refer to Navigation System (Click here).
      4. Refer to Rear Seat Entertainment System (Click here).
      Result
      Result
      		Proceed to
      DTCs for the audio and visual system are output.
      		A
      DTCs for the navigation system are output.
      		B
      DTCs for the rear seat entertainment system are output.
      		C


    		A.
    Go to step 13

    		B.
    GO TO NAVIGATION SYSTEM (Click here)

    		C.
    GO TO REAR SEAT ENTERTAINMENT SYSTEM (Click here)

    10.CHECK HARD DISK DRIVE

    1. Enter the "Failure Diagnosis" screen. Refer to Check Hard Disk Drive in Operation Check (Click here).

      OK:
      "OK" is displayed.


    		NG.
    REPLACE HARD DISC (Click here)
    OK


    11.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (Click here).

      Result
      Result
      		Proceed to
      Fault is not listed in Problem Symptoms Table.
      		A
      Fault is listed in Problem Symptoms Table.
      		B

      HINT:
      If the symptom does not recur and no DTCs are output, attempt to reproduce the symptoms (Click here).


    		B.
    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
    A


    12.PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM

    1. Refer to Terminals of ECU (Click here).


    NEXT


    13.CHECK CIRCUIT

    1. Adjust, repair or replace as necessary.


    NEXT


    14.RECHECK FOR DIAGNOSTIC TROUBLE CODE
      HINT:
      After clearing DTCs, recheck for DTCs (Click here).

    NEXT


    15.PERFORM CONFIRMATION TEST

      NEXT

      END