Audio And Visual System (For Radio And Display Type) Illumination For Panel Switch Does Not Come On With Tail Switch On

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSPECTION PROCEDURE

CHECK VEHICLE SIGNAL (OPERATION CHECK)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) - Illumination for Panel Switch does not Come on with Tail Switch ON


INSPECTION PROCEDURE

HINT:
When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
1.CHECK VEHICLE SIGNAL (OPERATION CHECK)
Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (Click here)]

  1. Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.

    OK:
    Headlight Dimmer Switch Assembly
    		Display
    Tail or head
    		ON
    Off
    		OFF
    HINT:
    This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

  1. Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the headlight dimmer switch assembly operation.

    OK:
    Headlight Dimmer Switch Assembly
    		Display
    Tail or head
    		DIM
    Off
    		BRIGHT


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)