Steering Control Ecu (For Rhd) Installation

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Variable Gear Ratio Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL STEERING CONTROL ECU

  2. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK

  3. INSTALL NO. 1 SWITCH HOLE BASE

  4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

  5. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  7. VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION

Steering Control Ecu (For Rhd) -- Installation



1. INSTALL STEERING CONTROL ECU

  1. Install the steering control ECU to the junction block with the claw and bolt.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}


2. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK

  1. Install the junction block with the bolt and 2 nuts.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}


3. INSTALL NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 4 claws to install the No. 1 switch hole base.



4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)
(Click here)


5. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)
(Click here)


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


7. VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(Click here)