Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Variable Gear Ratio Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
INSTALL LOWER INSTRUMENT PANEL (w/o Driver Side Knee Airbag)
INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)
Steering Control Ecu (For Lhd) -- Installation |
| 1. INSTALL STEERING CONTROL ECU |
Attach the 2 claws and install the steering control ECU to the junction block with the 2 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
| 2. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK |
Install the steering control ECU with junction block with the bolt and 2 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
Connect the connectors and wire harness clamp.
| 3. INSTALL NO. 1 SWITCH HOLE BASE |
 |
Connect the connectors.
Attach the 4 claws to install the No. 1 switch hole base.
| 4. INSTALL LOWER INSTRUMENT PANEL (w/o Driver Side Knee Airbag) |
| 5. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag) |
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 7. VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION |