Brake Control Dynamic Control Systems. Vehicle Stability Control System Multi-Terrain Select Indicator Light Does Not Come On

Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200

Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

VEHICLE STABILITY CONTROL SYSTEM - Multi-terrain Select Indicator Light does not Come ON

DESCRIPTION

When the transfer gear position is L4, the multi-terrain select indicator light illuminates and control begins.
Under any of the following conditions, the multi-terrain select system does not begin control and the multi-terrain select indicator light does not illuminate.

The vehicle is in the VSC/TRC OFF state.
Crawl Control is operating.
There is a malfunction in the VSC system.

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION LINE

Turn the ignition switch off.

Connect the GTS to the DLC3.

Turn the ignition switch to ON and the GTS on.

Select "CAN Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN Bus.
OK:
"CAN Bus Check" indicates no malfunctions in CAN communication.

Result
Result
Proceed to
OK
A
NG (for LHD)
B
NG (for RHD)
C

Result
Result	Proceed to
OK	A
NG (for LHD)	B
NG (for RHD)	C

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

A

2.CHECK DTC (CAN COMMUNICATION SYSTEM)

Turn the ignition switch off.

Connect the GTS to the DLC3.

Turn the ignition switch to ON and the GTS on.

Check for DTCs (for LHD: Click here, for RHD: Click here).

Result
Result
Proceed to
CAN system DTC is not output
A
CAN system DTC is output (for LHD)
B
CAN system DTC is output (for RHD)
C

Result
Result	Proceed to
CAN system DTC is not output	A
CAN system DTC is output (for LHD)	B
CAN system DTC is output (for RHD)	C

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)