Tire Pressure Monitoring. Tire Pressure Warning System Dtc Check / Clear

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200

Tire Pressure Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

Tire Pressure Warning System -- Dtc Check / Clear

CHECK DTC (USING THE GTS)

CHECK DTC (USING SST CHECK WIRE)

Turn the engine switch off.
Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
SST
09843-18040
Turn the engine switch on (IG).
Read and record any DTCs from the tire pressure warning light on the combination meter assembly. Refer to the illustration for examples of a normal system code and codes 13 and 33.
HINT:
1. If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.
  Trouble Area
  See page
  Tire pressure warning light circuit
  Click here
  TC and CG terminal circuit
  Click here
2. If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.
Text in Illustration
*1
DLC3
*2
Tire Pressure Warning Light
*a
Normal System Code
*b
ON
*c
OFF
*d
0.25 sec.
*e
Code 13 and 33
*f
0.5 sec.
*g
2.5 sec.
*h
1.5 sec.
*i
4.5 sec.
*j
Repeat
Refer to the Diagnostic Trouble Code Chart (Click here) for DTC information.
After completing the check, turn the engine switch off and remove SST from the DLC3.

CLEAR DTC

After repairing the malfunctions, clear the DTCs.

Turn the engine switch off.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.
Clear DTCs following the prompts on the GTS screen.
HINT:
Refer to the GTS operator's manual for further details.

Trouble Area	See page
Tire pressure warning light circuit	Click here
TC and CG terminal circuit	Click here