Suspension Control Ecu Removal

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Suspension Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  3. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

  4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

  6. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  7. REMOVE REAR STEP COVER

  8. REMOVE REAR DOOR SCUFF PLATE LH

  9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  11. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

  13. REMOVE REAR SIDE NO. 2 AIR DUCT (w/ Heater)

  14. REMOVE SUSPENSION CONTROL ECU

Suspension Control Ecu -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



3. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type)

  1. Remove the rear No. 2 seat assembly LH (Click here).



4. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


5. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type)

  1. Remove the rear No. 2 seat assembly LH (Click here).



6. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
HINT:
Use the same procedures described for the LH side.


7. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



8. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.



9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the support plate.



10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.



11. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Suspension Control.Suspension Control System.Suspension Control Ecu Removal
HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:
    Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 18 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Suspension Control.Suspension Control System.Suspension Control Ecu Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Suspension Control.Suspension Control System.Suspension Control Ecu Removal



  1. w/ Tonneau Cover:

    1. Remove the screw and clip.



    2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Suspension Control.Suspension Control System.Suspension Control Ecu Removal



13. REMOVE REAR SIDE NO. 2 AIR DUCT (w/ Heater)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 screws and duct.



14. REMOVE SUSPENSION CONTROL ECU


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the wire harness clamp and disconnect the connector.

  1. Remove the 2 bolts and ECU.