Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Suspension Control. Land Cruiser. Urj200, 202 Grj200 Vdj200
Active Height Control Pump And Motor -- Reassembly |
| 1. INSTALL NO. 1 HEIGHT CONTROL BOLT CUSHION |
Install the 3 bolt cushions and 3 bolt holders to the pump and motor.
| 2. INSTALL HEIGHT CONTROL RESERVOIR ASSEMBLY |
Using a 5 mm hexagon wrench, install the reservoir with the 5 bolts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
 |
| 3. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY |
Install the bracket with the 3 nuts.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
 |
| 4. CONNECT NO. 4 FRAME WIRE |
Connect the 2 connectors, clamp and frame wire.
 |
| 5. INSTALL HEIGHT CONTROL CAP TO RESERVOIR HOSE |
Install the hose to the reservoir tank, and push the connector up to attach it.
 |
Install the hose, 2 breather plugs and 3 clips to the reservoir hose.
 |
| 6. INSTALL HEIGHT CONTROL HOSE ASSEMBLY |
Install the hose to the reservoir and motor with the 2 clips.
 |
Connect the clamp to the reservoir.
Check that the direction of the hose clamp is as shown in the illustration.
 |