Active Height Control Suspension How To Proceed With Troubleshooting

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Suspension Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK FOR DTC*

  4. PROBLEM SYMPTOMS TABLE*

  5. OVERALL ANALYSIS AND TROUBLESHOOTING

  6. ADJUST, REPAIR OR REPLACE*

  7. CONFIRMATION TEST

Active Height Control Suspension -- How To Proceed With Troubleshooting


HINT:
  1. Use these procedures to troubleshoot the active height control suspension.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK FOR DTC*

    1. Check for DTCs (Click here).

    2. Clear the DTCs.

    3. Recheck for DTCs.

      Result
      Result
      		Proceed to
      DTC is not output
      		A
      CAN DTC is output
      		B
      DTC is output
      		C



    		B.
    Go to CAN communication system

    		C.
    Go to step 6
    A


    4.PROBLEM SYMPTOMS TABLE*

      Result:
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Terminals of ECU (Click here).


    NEXT


    6.ADJUST, REPAIR OR REPLACE*

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END