Front Drive Shaft Assembly Removal

Remove the 3 bolts and screw.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

Remove the 3 bolts and 2 screws.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

Remove the 10 bolts and No. 1 engine under cover.

Remove the 10 bolts and No. 1 engine under cover.

Stop the vehicle on a level place.

for Front Differential:

1. Remove the engine under cover.
   

2. Using a 10 mm hexagon wrench, remove the filler plug and gasket.
   

3. Using a 10 mm hexagon wrench, remove the drain plug and gasket, and drain the oil.
   

4. Using a 10 mm hexagon wrench, install a new gasket and the drain plug.
   

   Torque:

   39 N*m{400 kgf*cm, 29 ft.*lbf}

for Rear Differential:

1. Remove the filler plug and gasket.
   

2. Remove the drain plug and gasket, and drain the oil.
   

3. Install a new gasket and the drain plug.
   

   Torque:

   49 N*m{500 kgf*cm, 36 ft.*lbf}

Using SST, remove the drive shaft.

SST

09520-01010
09520-24010(09520-32040)

NOTICE:

Be careful not to damage the dust cover and oil seal.