4Wd Control Switch (W/ Entry And Start System) Inspection
Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Automatic Transmission)
INSPECT TRANSFER POSITION SWITCH (for Manual Transmission)
4Wd Control Switch (W/ Entry And Start System) -- Inspection |
| 1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (for Automatic Transmission) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
3 (2WD) - 7 (GND2)
| H4 Position
| 10 kΩ or higher
|
L4 Position
| Below 1 Ω
|
Text in Illustration*a
| Component without harness connected
(Integration Control and Panel Assembly)
|
If the result is not as specified, replace the integration control and panel assembly.
| 2. INSPECT TRANSFER POSITION SWITCH (for Manual Transmission) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
3 (2WD) - 7 (GND2)
| H4 Position
| 10 kΩ or higher
|
L4 Position
| Below 1 Ω
|
Text in Illustration*a
| Component without harness connected
(Transfer Position Switch)
|
If the result is not as specified, replace the transfer position switch.
