Valve Body Assembly Inspection

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
Ab60F Automatic Transmission Transaxle. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT SHIFT SOLENOID VALVE SL1

  2. INSPECT SHIFT SOLENOID VALVE S1

  3. INSPECT SHIFT SOLENOID VALVE S2

  4. INSPECT SHIFT SOLENOID VALVE S3

  5. INSPECT SHIFT SOLENOID VALVE S4

  6. INSPECT SHIFT SOLENOID VALVE SL2

  7. INSPECT SHIFT SOLENOID VALVE SR

  8. INSPECT SHIFT SOLENOID VALVE SLT

  9. INSPECT SHIFT SOLENOID VALVE SLU

Valve Body Assembly -- Inspection



1. INSPECT SHIFT SOLENOID VALVE SL1


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 1
    2. Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


2. INSPECT SHIFT SOLENOID VALVE S1


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S1 connector terminal - Shift solenoid valve S1 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve S1 connector
    2. Battery negative (-) → Shift solenoid valve S1 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


3. INSPECT SHIFT SOLENOID VALVE S2


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S2 connector terminal - Shift solenoid valve S2 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve S2 connector
    2. Battery negative (-) → Shift solenoid valve S2 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


4. INSPECT SHIFT SOLENOID VALVE S3


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S3 connector terminal - Shift solenoid valve S3 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve S3 connector
    2. Battery negative (-) → Shift solenoid valve S3 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


5. INSPECT SHIFT SOLENOID VALVE S4


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S4 connector terminal - Shift solenoid valve S4 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve S4 connector
    2. Battery negative (-) → Shift solenoid valve S4 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


6. INSPECT SHIFT SOLENOID VALVE SL2


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 1
    2. Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


7. INSPECT SHIFT SOLENOID VALVE SR


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve SR connector terminal - Shift solenoid valve SR body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) → Shift solenoid valve SR connector
    2. Battery negative (-) → Shift solenoid valve SR body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


8. INSPECT SHIFT SOLENOID VALVE SLT


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 2
    2. Battery negative (-) → Terminal 1
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


9. INSPECT SHIFT SOLENOID VALVE SLU


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ab60F Automatic Transmission Transaxle.Automatic Transmission System (For 1Ur-Fe).Valve Body Assembly Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    1. Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 2
    2. Battery negative (-) → Terminal 1
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.