Cruise Control System Fail-Safe Chart
Cruise Control System -- Fail-Safe Chart |
- HINT:
- If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.
Vehicle Condition
| Auto Cancel Condition
| Fail-safe Deactivation Condition
|
- w/o Multi-information Display
- Cruise control indicator light illuminates in yellow
- w/ Multi-information Display
- Cruise control indicator light turns off
- "CHECK CRUISE CONTROL SYSTEM" is displayed on the multi-information display in the combination meter
| - There is an open or short in the stop light switch circuit
- There is a problem with the vehicle speed signal
| Turn the cruise control main switch on again
|
Cruise control indicator light goes off
| - There is a problem with the throttle position sensor and the motor*1
- There is a problem with the fuel injection system*2
| Turn the cruise control main switch on again
|
- w/o Multi-information Display
- Cruise control indicator light illuminates in yellow
- w/ Multi-information Display
- Cruise control indicator light turns off
| - There is a problem with the input circuit of the stop light switch circuit
- There is a problem with the cancel circuit
| Turn the ignition switch off
|
Cruise control indicator light remains on (Cruise control is canceled)
| Under the following conditions, the stored vehicle speed is maintained:
- The vehicle speed is less than the low speed limit (approx. 40 km/h (25 mph)) while running with the cruise control on
- The VSC system is operated
- A cancel request is received from the 4WD system
| Push the cruise control main switch to +RES
|
- The vehicle speed is less than the stored speed by approx. 16 km/h (10 mph) or more
| Push the cruise control main switch to -SET
|
- HINT:
- *1: for 1GR-FE, 1UR-FE, 3UR-FE
- *2: for 1VD-FTV