Starter Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL FLYWHEEL HOUSING SIDE COVER

  2. INSTALL STARTER ASSEMBLY

  3. INSTALL STARTER COVER

  4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter -- Installation



1. INSTALL FLYWHEEL HOUSING SIDE COVER


2. INSTALL STARTER ASSEMBLY

  1. Install the starter with the 2 bolts.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}

  1. Connect the starter wire with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the terminal cap.

  1. Connect the starter connector.

  1. Connect the ground wire with the bolt.

    Torque:
    13 N*m{130 kgf*cm, 9 ft.*lbf}


3. INSTALL STARTER COVER

  1. Install the starter cover with the 3 bolts.

    Torque:
    12 N*m{117 kgf*cm, 8 ft.*lbf}


4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).