Injector Driver Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200

1Vd-Ftv Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSTALL INJECTOR DRIVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Injector Driver -- Installation

1. INSTALL INJECTOR DRIVER

NOTICE:

Be careful not to drop or strike the injector driver.

w/ DPF:
Install the No. 2 injector driver to the No. 2 injector driver bracket with the 4 screws.
Torque:
2.0 N*m{20 kgf*cm, 18 in.*lbf}

w/o DPF:
Install the No. 2 injector driver and injector driver bracket to the No. 2 injector driver bracket with the 4 screws.
Torque:
2.0 N*m{20 kgf*cm, 18 in.*lbf}

w/ DPF:
Install the No. 1 injector driver to the No. 1 injector driver bracket with the 4 screws.
Torque:
2.0 N*m{20 kgf*cm, 18 in.*lbf}

w/o DPF:
Install the No. 1 injector driver and injector driver bracket to the No. 1 injector driver bracket with the 4 screws.
Torque:
2.0 N*m{20 kgf*cm, 18 in.*lbf}

Install the No. 2 injector driver bracket to the No. 1 injector driver bracket with the 2 bolts.
Torque:
3.0 N*m{31 kgf*cm, 27 in.*lbf}

w/ DPF:
1. Install the injector driver assembly with the 3 bolts.
  Torque:
  8.0 N*m{82 kgf*cm, 71 in.*lbf}
2. Install the ground wire to the No. 2 injector driver bracket with the bolt.
  Torque:
  8.4 N*m{85 kgf*cm, 74 in.*lbf}
3. Connect the 7 injector driver connectors and attach the 2 wire harness clamps.

w/o DPF:
1. Install the injector driver assembly with the 3 bolts.
  Torque:
  8.0 N*m{82 kgf*cm, 71 in.*lbf}
2. Attach the fuel hose clamp and wire harness clamp.
3. Connect the 4 injector driver connectors.
4. Install the ground wire to the No. 1 injector driver bracket with the bolt.
  Torque:
  8.4 N*m{85 kgf*cm, 74 in.*lbf}

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

Connect the cables to the negative (-) main battery and sub-battery terminals.