Ecd System (W/ Dpf) How To Proceed With Troubleshooting

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. CONNECT GTS TO DLC3

  4. CHECK DTC AND FREEZE FRAME DATA*

  5. CLEAR DTC AND FREEZE FRAME DATA*

  6. CONDUCT VISUAL INSPECTION

  7. CONFIRM PROBLEM SYMPTOMS

  8. CHECK DTC*

  9. CONDUCT BASIC INSPECTION

  10. REFER TO PROBLEM SYMPTOMS TABLE

  11. PARTS INSPECTION

  12. IDENTIFY PROBLEM

  13. ADJUST AND/OR REPAIR

  14. CONFIRMATION TEST

Ecd System (W/ Dpf) -- How To Proceed With Troubleshooting


HINT:
*: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CONNECT GTS TO DLC3
        HINT:
        If the display indicates a communication fault with the GTS, inspect the DLC3.
        When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

      NEXT


      4.CHECK DTC AND FREEZE FRAME DATA*

      1. Check for DTCs (Click here) and freeze frame data (Click here).

        HINT:
        Record or print DTCs and freeze frame data if necessary.

      NEXT


      5.CLEAR DTC AND FREEZE FRAME DATA*

      1. Clear DTCs and freeze frame data (Click here).


      NEXT


      6.CONDUCT VISUAL INSPECTION

        NEXT


        7.CONFIRM PROBLEM SYMPTOMS
          HINT:
          If the engine does not start, first perform the "Check DTC" and "Basic Inspection" procedures below.
          Result
          Result
          		Proceed to
          Malfunction occurs
          		A
          Malfunction does not occur
          		B


        		B.
        SIMULATE SYMPTOMS
        A


        8.CHECK DTC*
          HINT:
          Refer to DTC Check / Clear (Click here).
          Result
          Result
          		Proceed to
          Trouble code
          		A
          No trouble code
          		B


        		B.
        Go to step 9
        A

        REFER TO DTC CHART


        9.CONDUCT BASIC INSPECTION

        1. Conduct basic inspection (Click here).

          2. Result
          Result
          		Proceed to
          Malfunctioning parts not confirmed
          		A
          Malfunctioning parts confirmed
          		B


        		B.
        Go to step 11
        A


        10.REFER TO PROBLEM SYMPTOMS TABLE
          HINT:
          1. Refer to Problem Symptoms Table (Click here).
          2. Also, refer to the inspection procedure for the problem symptom.

        NEXT


        11.PARTS INSPECTION

          NEXT


          12.IDENTIFY PROBLEM

            NEXT


            13.ADJUST AND/OR REPAIR

              NEXT


              14.CONFIRMATION TEST

                NEXT

                END