Dtc P0630 Vin Not Programmed Or Mismatch - Ecm / Pcm

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)

INPUT VIN OR FRAME NUMBER

DTC P0630 VIN not Programmed or Mismatch - ECM / PCM


DESCRIPTION

DTC P0630 is stored when the Vehicle Identification Number (VIN) or frame number is not stored in the ECM or the input VIN or frame number is not accurate.

DTC No.
DTC Detection Condition
Trouble Area
P0630
Either of the following conditions is met (1 trip detection logic):
  1. The VIN or frame number is not stored in the ECM.
  2. The VIN or frame number written to the ECM is not accurate.
ECM

INSPECTION PROCEDURE

1.CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)

  1. Connect the GTS to the DLC3.

  1. Turn the engine switch on (IG) and turn the GTS on.

  1. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

  1. Read DTCs.

    Result:

    Result
    		Proceed to
    P0630 is output
    		A
    P0630 and other DTCs are output
    		B
    If any DTCs other than P0630 are output, troubleshoot those DTCs first.
    HINT:
    If P0630 is output, the VIN or frame number must be written to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when the VIN or frame number is written. If DTCs other than P0630 are output, troubleshoot them first.


B
GO TO DTC CHART (Click here)
A


2.INPUT VIN OR FRAME NUMBER

  1. Write the VIN or frame number (Click here).


NEXT

END