Ignition Coil And Spark Plug Installation

Using a 16 mm plug wrench, install the 8 spark plugs.

Torque:

21 N*m{214 kgf*cm, 15 ft.*lbf}

for Bank 2:

1. Install the 4 ignition coils with the 4 bolts.
   

   Torque:

   10 N*m{102 kgf*cm, 7 ft.*lbf}

2. Connect the 4 ignition coil connectors.
   

3. Attach the 3 clamps and connect the engine wire.
   

4. Connect the water by-pass pipe with the 2 bolts.
   

   Torque:

   18 N*m{184 kgf*cm, 13 ft.*lbf}

for Bank 1:

1. Install the 4 ignition coils with the 4 bolts.
   

   Torque:

   10 N*m{102 kgf*cm, 7 ft.*lbf}

2. Connect the 4 ignition coil connectors.
   

3. Attach the 4 clamps and connect the engine wire.
   

Install the air cleaner and hose with the 3 bolts, and then tighten the hose clamp.

Torque:

for bolt:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

for hose clamp:

2.5 N*m{25 kgf*cm, 22 in.*lbf}

Attach the clamp and connect the mass air flow meter connector.

Connect the No. 2 PCV hose and No. 1 air hose.

Attach the 2 V-bank cover hooks to the bracket. Then align the 3 V-bank cover grommets with the 3 pins, and press down on the V-bank cover to attach the pins.