Throttle Body Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  4. DRAIN ENGINE COOLANT

  5. REMOVE V-BANK COVER SUB-ASSEMBLY

  6. REMOVE AIR CLEANER CAP AND HOSE

  7. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

Throttle Body -- Removal



1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and screw.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.



2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and 2 screws.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.



3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 10 bolts and No. 1 engine under cover sub-assembly.



4. DRAIN ENGINE COOLANT
CAUTION:
Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Loosen the radiator drain cock plug.

  1. Remove the radiator cap and drain the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.

  1. Loosen the 2 cylinder block drain cock plugs and drain the coolant from the engine.

  1. Tighten the 2 cylinder block drain cock plugs.

    Torque:
    13 N*m{130 kgf*cm, 9 ft.*lbf}


  1. Tighten the radiator drain cock plug by hand.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Engine Control.Sfi System.Throttle Body Removal


    Text in Illustration
    *1
    		Reservoir Cap
    		*2
    		Radiator Cap
    *3
    		Radiator Drain Cock Plug
    		*4
    		Cylinder Block Drain Cock Plug


5. REMOVE V-BANK COVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Ur-Fe Engine Control.Sfi System.Throttle Body Removal

  1. Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

    Text in Illustration
    *1
    		Grommet
    *2
    		Pin
    *3
    		Hook
    *4
    		Bracket


6. REMOVE AIR CLEANER CAP AND HOSE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the No. 2 PCV hose and No. 1 air hose.

  1. Disconnect the mass air flow meter connector and detach the clamp.

  1. Detach the 4 clamps.

  1. Loosen the hose clamp and remove the air cleaner cap and hose.



7. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the No. 4 water by-pass hose and No. 12 water by-pass hose.

  1. Disconnect the throttle position sensor and control motor connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts, throttle body with motor assembly and gasket.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the No. 12 water by-pass hose from the throttle body with motor assembly.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the No. 4 water by-pass hose from the throttle body with motor assembly.