Roof Drip Side Finish Moulding - Removal

Lexus IS250 IS220d GSE20 ALE20 - EXTERIOR

ROOF DRIP SIDE FINISH MOULDING - REMOVAL

1. REMOVE ROOF DRIP SIDE FINISH MOULDING

Put protective tape around the roof drip side finish moulding.

Using a moulding remover, disengage the 6 clips and remove the roof drip side finish moulding.

  • NOTICE:
Do not remove the clips.
If the clips are damaged or fall off, replace them with new clips.

Roof Drip Side Finish Moulding - Removal. EXTERIOR. Lexus IS250 IS220d GSE20 ALE20

2. REMOVE NO. 1 WINDSHIELD OUTSIDE MOULDING CLIP
  • HINT:
  • Perform the following procedure if replacing the No. 1 windshield outside moulding clips.

Remove the 5 No. 1 windshield outside moulding clips.

Roof Drip Side Finish Moulding - Removal. EXTERIOR. Lexus IS250 IS220d GSE20 ALE20

3. REMOVE ROOF DRIP SIDE FINISH MOULDING CENTER

Put protective tape around the roof drip side finish moulding center.

Using a moulding remover, disengage the 2 clips and remove the roof drip side finish moulding center.

  • NOTICE:
Do not remove the clips.
If the clips are damaged or dropped off, replace them with new clips.

Roof Drip Side Finish Moulding - Removal. EXTERIOR. Lexus IS250 IS220d GSE20 ALE20

4. REMOVE NO. 1 ROOF DRIP SIDE FINISH MOULDING CLIP
  • HINT:
  • Perform the following procedure if replacing the No. 1 roof drip side finish moulding clips.

Remove the 2 No. 1 roof drip side finish moulding clips.

Roof Drip Side Finish Moulding - Removal. EXTERIOR. Lexus IS250 IS220d GSE20 ALE20