Outer Rear View Mirror Inspection

Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Mirror (Ext). Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH

Outer Rear View Mirror -- Inspection



1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) →Terminal 9 (MV)
    Battery negative (-) → Terminal 8 (M+)
    		Turns upward
    Battery positive (+) → Terminal 8 (M+)
    Battery negative (-) → Terminal 9 (MV)
    		Turns downward
    Battery positive (+) → Terminal 4 (MH)
    Battery negative (-) → Terminal 8 (M+)
    		Turns left
    Battery positive (+) → Terminal 8 (M+)
    Battery negative (-) → Terminal 4 (MH)
    		Turns right
    If the result is not as specified, replace the outer rear view mirror assembly LH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly LH)


  1. w/ Side Turn Signal Light:



      Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

    1. Check the side turn signal light assembly.
      Apply battery voltage to the terminals of the connector, and check the illumination condition.

      OK:
      Tester Connection
      		Specified Condition
      Battery positive (+) → Terminal 10 (TRNL)
      Battery negative (-) → Terminal 6 (GND)
      		Side turn signal light illuminates
      If the result is not as specified, replace the side turn light assembly.


2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

  1. Disconnect the mirror connector.

  1. Apply battery voltage and check operation of the mirror.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) →Terminal 9 (MV)
    Battery negative (-) → Terminal 8 (M+)
    		Turns upward
    Battery positive (+) → Terminal 8 (M+)
    Battery negative (-) → Terminal 9 (MV)
    		Turns downward
    Battery positive (+) → Terminal 4 (MH)
    Battery negative (-) → Terminal 8 (M+)
    		Turns left
    Battery positive (+) → Terminal 8 (M+)
    Battery negative (-) → Terminal 4 (MH)
    		Turns right
    If the result is not as specified, replace the outer rear view mirror assembly RH.
    Text in Illustration
    *a
    		Component without harness connected
    (Outer Rear View Mirror Assembly RH)


  1. w/ Side Turn Signal Light:



      Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Mirror (Ext).Power Mirror Control System.Outer Rear View Mirror Inspection

    1. Check the side turn signal light assembly.
      Apply battery voltage to the terminals of the connector, and check the illumination condition.

      OK:
      Tester Connection
      		Specified Condition
      Battery positive (+) → Terminal 10 (TRNR)
      Battery negative (-) → Terminal 6 (GND)
      		Side turn signal light illuminates
      If the result is not as specified, replace the side turn signal light assembly.