Quarter Window Glass (For Extra Cab) Removal
REMOVE FRONT SEAT ASSEMBLY RH
REMOVE FRONT DOOR SCUFF PLATE RH
REMOVE FRONT DOOR OPENING TRIM RH
REMOVE REAR SEAT ASSEMBLY
REMOVE LOWER BACK PANEL GARNISH
REMOVE QUARTER INSIDE TRIM BOARD RH
REMOVE QUARTER PILLAR GARNISH RH
REMOVE INNER UPPER ROOF SIDE GARNISH RH
REMOVE QUARTER WINDOW GLASS RH
REMOVE QUARTER WINDOW LOCK ASSEMBLY RH
REMOVE QUARTER WINDOW HINGE RH
REMOVE QUARTER WINDOW WEATHERSTRIP RH
Quarter Window Glass (For Extra Cab) -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the RH side.
1. REMOVE FRONT SEAT ASSEMBLY RH |
for Bench Seat Type:
(HILUX_TGN26 RM000000Z8U08XX_02_0004.html)
for Separate Seat Type:
(HILUX_TGN26 RM000000Z9000EX_02_0004.html)
2. REMOVE FRONT DOOR SCUFF PLATE RH |
Put protective tape around the front door scuff plate.
Text in Illustration*1
| Protective Tape
|
Using a moulding remover D, detach the 4 clips and 8 claws and remove the front door scuff plate.
3. REMOVE FRONT DOOR OPENING TRIM RH |
Partially remove the front door opening trim RH so that the quarter inside trim board RH, quarter pillar garnish RH and inner upper roof side garnish RH can be removed (HILUX_TGN26 RM00000148O01KX_01_0005.html).
4. REMOVE REAR SEAT ASSEMBLY |
(HILUX_TGN26 RM000000Z95005X.html)
5. REMOVE LOWER BACK PANEL GARNISH |
Detach the 6 claws, 2 guides and 5 clips and remove the lower back panel garnish.
6. REMOVE QUARTER INSIDE TRIM BOARD RH |
Remove the bolt and disconnect the front seat outer belt floor anchor.
Detach the 4 claws, 3 guides and 7 clips and remove the quarter inside trim board RH.
7. REMOVE QUARTER PILLAR GARNISH RH |
Using a screwdriver, detach the 4 claws and remove the front seat belt anchor cover cap.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration*1
| Protective Tape
|
Remove the bolt and disconnect the front seat belt shoulder anchor.
Detach the 2 clips and remove the quarter pillar garnish.
8. REMOVE INNER UPPER ROOF SIDE GARNISH RH |
Detach the 3 clips and remove the inner upper roof side garnish RH.
9. REMOVE QUARTER WINDOW GLASS RH |
- NOTICE:
- When separating the glass from the vehicle, be careful not to damage the vehicle's paint or interior/exterior ornaments.
- Procedures must be performed with 2 people, where the second person supports the glass.
Release the quarter window lock assembly RH.
Remove the 2 bolts.
Remove the 2 bolts.
Remove the quarter window glass RH as shown in the illustration.
10. REMOVE QUARTER WINDOW LOCK ASSEMBLY RH |
Remove the screw, bush, quarter window hinge retainer RH and quarter window lock assembly RH.
Text in Illustration*1
| Retainer
|
*2
| Bush
|
*3
| Screw
|
11. REMOVE QUARTER WINDOW HINGE RH |
Remove the 2 screws, 2 washers, 2 retainers, 2 bushes and 2 quarter window hinges RH.
Text in Illustration*1
| Retainer
|
*2
| Bush
|
*3
| Washer
|
*4
| Screw
|
12. REMOVE QUARTER WINDOW WEATHERSTRIP RH |
Remove the quarter window weatherstrip RH.