Vehicle Exterior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Window Glass. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
POWER WINDOW CONTROL SYSTEM (w/o Jam Protection Function) - Power Windows do not Operate at All |
DESCRIPTION
If all of the power windows do not operate, the power window regulator master switch assembly may have no power or may be malfunctioning.WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
| 1.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - BATTERY AND BODY GROUND) |
for Double Cab:
Disconnect the I12 power window regulator master switch assembly connector.
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Switch Condition Specified Condition I12-6 (B) - Body ground Ignition switch ON 11 to 14 V Ignition switch off Below 1 V
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition I12-3 (E) - Body ground Always Below 1 Ω
except Double Cab:
Disconnect the I13 power window regulator master switch assembly connector.
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Switch Condition Specified Condition I13-9 (B) - Body ground Ignition switch ON 11 to 14 V Ignition switch off Below 1 V
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition I13-1 (E) - Body ground Always Below 1 Ω
| *a | Front view of wire harness connector (to Power Window Regulator Master Switch Assembly) |
|
| ||||
| OK | ||
| ||