Roof Headlining (For Double Cab) Removal

Vehicle Interior. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Interior Panels Trim. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. PRECAUTION (w/ Airbag System)

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Airbag System)

  3. REMOVE REAR SEAT ASSEMBLY

  4. REMOVE FRONT DOOR SCUFF PLATE LH

  5. REMOVE FRONT DOOR SCUFF PLATE RH

  6. REMOVE FRONT DOOR OPENING TRIM LH

  7. REMOVE FRONT DOOR OPENING TRIM RH

  8. REMOVE FRONT NO. 1 ASSIST GRIP PLUG LH (w/ Assist Grip)

  9. REMOVE FRONT NO. 1 ASSIST GRIP PLUG RH (w/ Assist Grip)

  10. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)

  11. REMOVE FRONT PILLAR GARNISH LH

  12. REMOVE FRONT PILLAR GARNISH RH

  13. REMOVE REAR DOOR SCUFF PLATE LH

  14. REMOVE REAR DOOR SCUFF PLATE RH

  15. REMOVE REAR DOOR OPENING TRIM LH

  16. REMOVE REAR DOOR OPENING TRIM RH

  17. REMOVE LOWER CENTER PILLAR GARNISH LH

  18. REMOVE LOWER CENTER PILLAR GARNISH RH

  19. REMOVE CENTER PILLAR GARNISH LH

  20. REMOVE CENTER PILLAR GARNISH RH

  21. REMOVE UPPER BACK PANEL GARNISH

  22. REMOVE LOWER QUARTER TRIM PANEL LH

  23. REMOVE LOWER QUARTER TRIM PANEL RH

  24. REMOVE QUARTER INSIDE TRIM BOARD LH

  25. REMOVE QUARTER INSIDE TRIM BOARD RH

  26. REMOVE MAP LIGHT ASSEMBLY

  27. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

  28. REMOVE VISOR ASSEMBLY LH

  29. REMOVE VISOR ASSEMBLY RH

  30. REMOVE VISOR HOLDER LH

  31. REMOVE VISOR HOLDER RH

  32. REMOVE ASSIST GRIP

  33. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

  34. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

  35. REMOVE NO. 2 HEATER TO REGISTER DUCT

  36. REMOVE NO. 1 HEATER TO REGISTER DUCT

  37. REMOVE NO. 3 HEATER TO REGISTER DUCT

  38. REMOVE DEFROSTER NOZZLE ASSEMBLY (w/ Defroster)

  39. REMOVE BACK WINDOW GLASS

  40. REMOVE ROOF HEADLINING ASSEMBLY

  41. REMOVE FRONT SIDE RAIL SPACER LH

  42. REMOVE FRONT SIDE RAIL SPACER RH

  43. REMOVE SIDE RAIL SPACER

  44. REMOVE REAR NO. 2 SIDE RAIL SPACER LH

  45. REMOVE REAR NO. 2 SIDE RAIL SPACER RH

  46. REMOVE REAR NO. 3 SIDE RAIL SPACER LH

  47. REMOVE REAR NO. 3 SIDE RAIL SPACER RH

Roof Headlining (For Double Cab) -- Removal



1. PRECAUTION (w/ Airbag System)
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1006X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Airbag System)
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3008X.html).


3. REMOVE REAR SEAT ASSEMBLY
(HILUX_TGN26 RM000000Z9A00AX.html)


4. REMOVE FRONT DOOR SCUFF PLATE LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Put protective tape around the front door scuff plate.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 7 claws and 3 clips, and remove the front door scuff plate.



5. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure described for the LH side.


6. REMOVE FRONT DOOR OPENING TRIM LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the front door opening trim.



7. REMOVE FRONT DOOR OPENING TRIM RH
HINT:
Use the same procedure described for the LH side.


8. REMOVE FRONT NO. 1 ASSIST GRIP PLUG LH (w/ Assist Grip)


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal
HINT:
Use the same procedure for both front No. 1 assist grip plugs.

  1. Using a screwdriver, detach the 2 claws and remove the front No. 1 assist grip plug.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


9. REMOVE FRONT NO. 1 ASSIST GRIP PLUG RH (w/ Assist Grip)
HINT:
Use the same procedure described for the LH side.


10. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
HINT:
Use the same procedure for both assist grips.

  1. Remove the 2 screws and front assist grip.



11. REMOVE FRONT PILLAR GARNISH LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 clips and 2 guides and remove the front pillar garnish.



12. REMOVE FRONT PILLAR GARNISH RH
HINT:
Use the same procedure described for the LH side.


13. REMOVE REAR DOOR SCUFF PLATE LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Put protective tape around the rear door scuff plate.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 7 claws and 2 clips, and remove the rear door scuff plate.



14. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure described for the LH side.


15. REMOVE REAR DOOR OPENING TRIM LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the rear door opening trim.



16. REMOVE REAR DOOR OPENING TRIM RH
HINT:
Use the same procedure described for the LH side.


17. REMOVE LOWER CENTER PILLAR GARNISH LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the bolt and disconnect the front seat outer belt floor anchor.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 claws, 2 guides and 2 clips and remove the lower center pillar garnish.



18. REMOVE LOWER CENTER PILLAR GARNISH RH
HINT:
Use the same procedure described for the LH side.


19. REMOVE CENTER PILLAR GARNISH LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Using a screwdriver, detach the 4 claws and remove the front seat belt shoulder anchor cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape

  1. Remove the bolt and disconnect the front seat belt shoulder anchor.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the clip.

  1. Pull the center pillar garnish in the direction indicated by the arrow in the illustration to detach the guide and remove the center pillar garnish.



20. REMOVE CENTER PILLAR GARNISH RH
HINT:
Use the same procedure described for the LH side.


21. REMOVE UPPER BACK PANEL GARNISH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 4 claws and 5 clips and remove the upper back panel garnish.



22. REMOVE LOWER QUARTER TRIM PANEL LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the claw and 3 clips and remove the lower quarter trim panel.



23. REMOVE LOWER QUARTER TRIM PANEL RH
HINT:
Use the same procedure described for the LH side.


24. REMOVE QUARTER INSIDE TRIM BOARD LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Using a screwdriver, detach the 2 claws and open the rear seat belt shoulder anchor cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape

  1. Remove the bolt and disconnect the rear seat belt shoulder anchor.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 4 clips and remove the quarter inside trim board.



25. REMOVE QUARTER INSIDE TRIM BOARD RH
HINT:
Use the same procedure described for the LH side.


26. REMOVE MAP LIGHT ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 2 screws.

  1. Detach the 2 guides and remove the map light assembly.

  1. Disconnect the connector.



27. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Using a screwdriver wrapped with protective tape, detach the 4 claws and remove the lens.

    HINT:
    Protective tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 2 screws and remove the No. 1 room light assembly.

  1. Disconnect the connector.



28. REMOVE VISOR ASSEMBLY LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the guide.

  1. Remove the 2 screws and visor.



29. REMOVE VISOR ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.


30. REMOVE VISOR HOLDER LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the screw.

  1. Detach the 2 claws and remove the visor holder.



31. REMOVE VISOR HOLDER RH
HINT:
Use the same procedure described for the LH side.


32. REMOVE ASSIST GRIP


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal
HINT:
Use the same procedure for all assist grips.

  1. Using a screwdriver, detach the 4 claws and open the 2 covers.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 2 screws and assist grip.



33. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(HILUX_TGN26 RM000003O1000KX.html)


34. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.



35. REMOVE NO. 2 HEATER TO REGISTER DUCT


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 3 clips and No. 2 heater to register duct.



36. REMOVE NO. 1 HEATER TO REGISTER DUCT


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the clip.

  1. Detach the 3 claws and remove the No. 1 heater to register duct.



37. REMOVE NO. 3 HEATER TO REGISTER DUCT


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the clip.

  1. Detach the 4 claws and remove the No. 3 heater to register duct.



38. REMOVE DEFROSTER NOZZLE ASSEMBLY (w/ Defroster)


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Using a screwdriver, detach the 4 clips and remove the defroster nozzle assembly.



39. REMOVE BACK WINDOW GLASS
(HILUX_TGN26 RM0000014CC00ZX.html)


40. REMOVE ROOF HEADLINING ASSEMBLY


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 5 clamps from the front pillar.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Disconnect the connectors and detach the 4 clamps.



    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Interior Panels Trim.Upper Instrument Panel.Roof Headlining (For Double Cab) Removal

  1. Using a clip remover, remove the clips.

    Text in Illustration
    *A
    		w/o Assist Grip


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the roof headlining as shown in the illustration.

    NOTICE:
    Be careful not to damage the roof headlining when removing it.


41. REMOVE FRONT SIDE RAIL SPACER LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 claws and remove the front side rail spacer.



42. REMOVE FRONT SIDE RAIL SPACER RH
HINT:
Use the same procedure described for the LH side.


43. REMOVE SIDE RAIL SPACER


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 2 claws and remove the side rail spacer.



44. REMOVE REAR NO. 2 SIDE RAIL SPACER LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
HINT:
Use the same procedure for both rear No. 2 side rail spacers.

  1. Detach the 2 claws and remove the rear No. 2 side rail spacer.



45. REMOVE REAR NO. 2 SIDE RAIL SPACER RH
HINT:
Use the same procedure described for the LH side.


46. REMOVE REAR NO. 3 SIDE RAIL SPACER LH


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Detach the 3 claws and remove the rear No. 3 side rail spacer.



47. REMOVE REAR NO. 3 SIDE RAIL SPACER RH
HINT:
Use the same procedure described for the LH side.