Dtc B15C0 Short In Gps Antenna
DESCRIPTION
INSPECTION PROCEDURE
CHECK CONNECTION OF CONNECTOR
CLEAR DTC
CHECK FOR DTC
CHECK CONNECTOR CONDITION
CHECK INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY (GPS ANTENNA)
CLEAR DTC
CHECK FOR DTC
REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY
CLEAR DTC
CHECK FOR DTC
DTC B15C0 Short in GPS Antenna |
DTC B15C1 Open in GPS Antenna |
DESCRIPTION
These DTCs are stored when a malfunction occurs in the instrument panel integration antenna assembly (GPS antenna) circuit. DTC Code
| DTC Detection Condition
| Trouble Area
|
B15C0
| There is a short circuit in the navigation antenna assembly (GPS antenna) between the telephone transceiver and instrument panel integration antenna assembly, or at the points where it connects to the telephone transceiver and instrument panel integration antenna assembly.
| - Telephone transceiver assembly
- Instrument panel integration antenna assembly (GPS antenna)
|
B15C1
| There is an open circuit in the instrument panel integration antenna assembly (GPS antenna) between the telephone transceiver and instrument panel integration antenna assembly, or at the points where it connects to the telephone transceiver and instrument panel integration antenna assembly.
|
INSPECTION PROCEDURE
- NOTICE:
- When replacing the telephone transceiver, or integration antenna assembly, refer to the Service Bulletin.
- When the telephone transceiver is replaced, it is necessary to set the contract mode.
1.CHECK CONNECTION OF CONNECTOR |
Turn the ignition switch off.
Check that the connectors are properly connected to the telephone transceiver, instrument panel integration antenna assembly.
- OK:
- Connectors are properly connected.
| CONNECT CONNECTOR CORRECTLY |
|
|
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Check for DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B15C0 or B15C1 is not output.
4.CHECK CONNECTOR CONDITION |
Disconnect the instrument panel integration antenna assembly (GPS antenna) connector [color: blue].
Check that the connector pins are not bent.
- OK:
- Connector pins are not bent.
| REPAIR OR REPLACE NAVIGATION ANTENNA ASSEMBLY |
|
|
5.CHECK INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY (GPS ANTENNA) |
Disconnect the instrument panel integration antenna assembly (GPS antenna) connector [color: blue].
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
Core wire - Shield
| Always
| 50 to 500 Ω
|
Text in Illustration*1
| Core wire
|
*2
| Shield
|
| REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY |
|
|
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Wiggle the navigation antenna (GPS antenna).
Check for DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B15C0 or B15C1 is not output.
8.REPLACE INSTRUMENT PANEL INTEGRATION ANTENNA ASSEMBLY |
Temporarily replace the instrument panel integration antenna assembly with a new or normally functioning one.
Clear the DTCs (HILUX_TGN26 RM0000044SM00EX.html).
Check for DTCs (HILUX_TGN26 RM0000044SM00EX.html).
- OK:
- DTC B15C0 or B15C1 is not output.
| REPLACE TELEPHONE TRANSCEIVER ASSEMBLY |
|
|
OK |
|
|
|
END (INSTRUMENT PANEL INTEGRATION ANTENNA IS DEFECTIVE) |
|