Generator (For Denso Made) Installation

Install the generator with the 2 bolts.

Torque:

for bolt A:

62 N*m{632 kgf*cm, 46 ft.*lbf}

for bolt B:

25 N*m{255 kgf*cm, 18 ft.*lbf}

Install the generator wire with the nut.

Torque:

9.8 N*m{100 kgf*cm, 87 in.*lbf}

Connect the generator connector.

Install the spacer, No. 2 idle pulley and pulley plate with the bolt.

Torque:

45 N*m{459 kgf*cm, 33 ft.*lbf}

Rotate the V-ribbed belt tensioner pulley clockwise, and then install the fan and generator V belt.

NOTICE:

Make sure that the fan and generator V belt is set properly on each pulley.

Check that the indicator mark of the V-ribbed belt tensioner (HILUX_TGN26 RM000001475015X.html).

Connect the air cleaner hose.

Install the cleaner with the 2 bolts.

Torque:

14 N*m{143 kgf*cm, 10 ft.*lbf}

Tighten the hose clamp.

Connect the connector to the mass air flow meter connector.