Front Door Speaker Installation

Install a nose piece to an air riveter or hand riveter. Then insert the mandrel part of a new φ4 mm waterproof rivet into the nose piece.

Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new rivets.

NOTICE:

1. Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
   

   Text in Illustration

   *a	INCORRECT
   *b	CORRECT
   *1	Mandrel
   *2	Riveter



2. Confirm that the rivets are seated properly against the speaker.
   

   Text in Illustration

   *a	INCORRECT
   *b	CORRECT
   *1	Riveter

3. Do not tilt the riveter when installing the rivet to the speaker.
   
4. Do not leave any space between the rivet head and speaker.
   


5. Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.
   

   Text in Illustration

   *a	INCORRECT
   *b	CORRECT
   *1	Riveter

Connect the connector.

for Double Cab:

1. Attach the 8 clips to install the front door trim board.
   

2. Install the screw and clip.
   

for Single Cab, for Extra Cab:

1. Attach the 9 clips to install the front door trim board.
   

2. Install the screw and clip.
   

Connect the connector.

Attach the 4 claws and 2 clips to install the power window regulator switch assembly with front door armrest base panel.

Install the door pull handle with the screw.

Temporarily install the front door window regulator handle, fully close the window, and then remove the front door window regulator handle.

Install the plate and snap ring to the front door window regulator handle.

Install the front door window regulator handle to the front door window regulator as shown in the illustration.

Standard:

Area	Specified Condition
A	18 to 42°

Install the front No. 2 speaker assembly with the screw.

Connect the connector.

Attach the 2 clips to install the front door lower frame bracket garnish.