Audio Visual Telematics. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Audio Video. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Audio And Visual System (For Radio Receiver Type) -- How To Proceed With Troubleshooting |
- HINT:
- Use these procedures to troubleshoot the audio and visual system.
1.VEHICLE BROUGHT TO WORKSHOP |
|
2.INSPECT BATTERY VOLTAGE |
Measure the battery voltage with the ignition switch off.
- Standard voltage:
- 11 to 14 V
- If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
3.BASIC INSPECTION |
Turn the ignition switch to ON.
Check whether or not the radio receiver turns on.
Result Result Proceed to Radio receiver turns on A Radio receiver does not turn on B
|
| ||||
|
4.CHECK FOR DTC |
Check for DTCs and note any codes that are output (HILUX_TGN26 RM0000014CZ0AYX.html).
Clear the DTCs.
Recheck for DTCs by simulating the operation indicated by the DTCs.
Result Result Proceed to DTC is not output A DTC is output B
|
| ||||
|
5.PROBLEM SYMPTOMS TABLE |
Refer to the Problem Symptoms Table (HILUX_TGN26 RM0000012A80D1X.html).
Result Result Proceed to Fault is not listed in problem symptoms table A Fault is listed in problem symptoms table B
|
| ||||
|
6.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (HILUX_TGN26 RM0000012A70AJX.html).
|
7.ADJUST, REPAIR OR REPLACE |
|
8.CONFIRMATION TEST |
| |||||
|
---|