Brake Pedal (W/ Vsc) Removal
Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS
REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
Brake Pedal (W/ Vsc) -- Removal |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (HILUX_TGN26 RM000004QR1003X.html).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3003X.html).
| 3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
(HILUX_TGN26 RM000003O1000FX.html)
| 4. DISCONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
Disconnect the stop light switch connector and brake pedal load sensing switch connector.
Remove the return spring.
Text in Illustration*1
| Brake Pedal Return Spring
|
*2
| Clevis Pin
|
*3
| Clip
|
Remove the clip and clevis pin.
Disconnect the push rod clevis from the brake pedal.
| 5. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY |
for Manual Transmission:
Detach the connector clamp and clamp from the brake pedal support sub-assembly.
Remove the bolt from the support.
Text in Illustration*1
| Brake Pedal Support
|
*2
| Instrument Panel Reinforcement
|
Remove the 4 nuts and support.
