Anti-Lock Brake System Abs Warning Light Does Not Come On
Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK ABS WARNING LIGHT
CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER)
ANTI-LOCK BRAKE SYSTEM - ABS Warning Light does not Come ON |
WIRING DIAGRAM
Refer to ABS Warning Light Remains ON (HILUX_TGN26 RM000003O4G012X_02.html).
INSPECTION PROCEDURE
| 1.CHECK ABS WARNING LIGHT |
Disconnect the skid control ECU (brake actuator assembly) connector.
Turn the ignition switch to ON.
Check that the ABS warning light comes on.
- OK:
- The ABS warning light comes on.
| 2.CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER) |
Turn the ignition switch off.
Disconnect the skid control ECU (brake actuator assembly) connector.
Disconnect the G19 combination meter connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
A13-13 (WA) - G19-38 (LP)
| Always
| Below 1 Ω
|
A13-13 (WA) - Body ground
| Always
| 10 kΩ or higher
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|