Suspension. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Rear Suspension. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Rear Shock Absorber (For 4Wd And Pre-Runner) -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH |
 |
Install the 2 washers to the axle housing.
Install 4 new bushes to the absorber.
Install the absorber (with the 4 bushes) to the U bolt seat and frame.
Install the 2 washers.
Temporarily install the 2 bolts.
| 2. INSTALL REAR WHEEL |
Install the wheel.
- Torque:
- 105 N*m{1070 kgf*cm, 77 ft.*lbf}
| 3. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 4. TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH |
Tighten the 2 bolts.
- Torque:
- 105 N*m{1070 kgf*cm, 77 ft.*lbf}