Front Axle Hub (For 2Wd) Installation

Using SST and a press, press a new bearing into the steering knuckle.

SST

09527-17011
09950-60020(09951-00910)

Using snap ring pliers, install a new snap ring.

Using SST and a plastic-faced hammer, tap in a new oil seal.

SST

09223-15030
09527-17011

Apply MP grease to the lip of the oil seal.

Install the dust cover to the steering knuckle with the 3 bolts.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}

Using SST and a press, press the axle hub into the steering knuckle.

SST

09223-00010

Install the ABS speed sensor rotor.

Install the spacer.

Install a new nut to the axle hub.

Torque:

199 N*m{2029 kgf*cm, 147 ft.*lbf}

Using a chisel and hammer, stake the nut.

NOTICE:

Do not scratch the serration of the speed sensor rotor.

Using a brass bar and hammer, install the knuckle grease retainer cap.

NOTICE:

Do not damage the knuckle grease retainer cap.

Install the front axle hub assembly.

Connect the upper arm with the nut.

Torque:

110 N*m{1122 kgf*cm, 81 ft.*lbf}

Install a new clip.

NOTICE:

If the holes for the clip are not aligned, tighten the nut an additional 60°.

Connect the suspension arm with the 2 bolts.

Torque:

160 N*m{1632 kgf*cm, 118 ft.*lbf}

Connect the tie rod end with the nut.

Torque:

49 N*m{500 kgf*cm, 36 ft.*lbf}

Install a new cotter pin.

NOTICE:

If the holes for the cotter pin are not aligned, tighten the nut an additional 60°.

Align the matchmarks and install the disc.

HINT:

When replacing the disc with a new one, select the installation position where the disc has the smallest runout.

Install the speed sensor with the bolt.

Torque:

8.5 N*m{87 kgf*cm, 75 in.*lbf}

Connect the 3 clamps with the 3 bolts.

Torque:

32 N*m{326 kgf*cm, 24 ft.*lbf}

Install the brake cylinder with the 2 bolts.

Torque:

117 N*m{1191 kgf*cm, 86 ft.*lbf}

Install a new gasket and connect the flexible hose with a new union bolt.

Torque:

29 N*m{296 kgf*cm, 21 ft.*lbf}

HINT:

Insert the flexible hose lock securely into the lock hole in the cylinder.