Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Vf2A Transfer 4Wd Awd. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Transfer System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | See page |
| Noise | Oil (Level low) | HILUX_TGN26 RM000001ORK00GX.html |
| Oil (Wrong) | HILUX_TGN26 RM000001ORK00GX.html | |
| Transfer (Faulty) | HILUX_TGN26 RM0000010LZ00GX.html | |
| Oil leakage | Oil (Level too high) | HILUX_TGN26 RM000001ORK00GX.html |
| Gasket (Damaged) | HILUX_TGN26 RM0000010LZ00GX.html | |
| Oil seal (Worn or damaged) | HILUX_TGN26 RM0000010LZ00GX.html | |
| O-ring (Worn or damaged) | HILUX_TGN26 RM0000010LZ00GX.html | |
| Hard to shift or will not shift | Shifting key spring (Damaged) | HILUX_TGN26 RM0000010LZ00GX.html |
| Synchronizer ring (Worn or damaged) | HILUX_TGN26 RM0000010LZ00GX.html | |
| Shift from H2 to H4 impossible | Indicator switch (for 4WD position) | HILUX_TGN26 RM0000015HR00KX.html |
| Wire harness | HILUX_TGN26 RM00000112F00VX.html | |
| Skid control ECU with actuator | HILUX_TGN26 RM0000010KZ00VX.html | |
| Shift from H4 to H2 impossible | Indicator switch (for 4WD position) | HILUX_TGN26 RM0000015HR00KX.html |
| Wire harness | HILUX_TGN26 RM00000112F00VX.html | |
| Skid control ECU with actuator | HILUX_TGN26 RM000000ONH02BX.html | |
| Shift from H4 to L4 impossible | Indicator switch (for 4WD position) | HILUX_TGN26 RM0000015HR00KX.html |
| Indicator switch (for L4 position) | HILUX_TGN26 RM0000015HR00KX.html | |
| Wire harness | HILUX_TGN26 RM00000112F00VX.html | |
| Skid control ECU with actuator | HILUX_TGN26 RM000000ONH02BX.html | |
| Shift from L4 to H4 impossible | Indicator switch (for 4WD position) | HILUX_TGN26 RM0000015HR00KX.html |
| Indicator switch (for L4 position) | HILUX_TGN26 RM0000015HR00KX.html | |
| Wire harness | HILUX_TGN26 RM00000112F00VX.html | |
| Skid control ECU with actuator | HILUX_TGN26 RM000000ONH02BX.html |