Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
INSPECT NO. 2 SYNCHRONIZER RING
Input Shaft -- Inspection |
| 1. INSPECT NO. 2 SYNCHRONIZER RING |
Apply gear oil to the cone of the input shaft, and check that it does not turn in either direction while pushing the No. 2 synchronizer ring.
Text in Illustration*a
| Locks
|
If it can turn, replace the No. 2 synchronizer ring.
Push the No. 2 synchronizer ring against the cone of the input shaft. Measure the clearance between the No. 2 synchronizer ring and input shaft.
- Standard clearance:
- 0.70 to 1.70 mm (0.0276 to 0.0669 in.)
If the clearance is not as specified, replace the No. 2 synchronizer ring with a new one.
