Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
INSPECT SHIFT LOCK CONTROL ECU
Shift Lever -- Inspection |
| 1. INSPECT SHIFT LOCK CONTROL ECU |
Measure the voltage and resistance according to the value(s) in the table below.
- HINT:
- Do not disconnect the shift lock control ECU connector.
- Standard Voltage and Resistance:
Tester Connection
| Condition
| Specified Condition
|
G37-6 (ACC) - G37-8 (E)
| Ignition switch ON
| 10 to 14 V
|
Ignition switch ACC
| 10 to 14 V
|
Ignition switch off
| Below 1 V
|
G37-7 (STP) - G37-8 (E)
| Brake pedal depressed
| 10 to 14 V
|
Brake pedal released
| Below 1 V
|
G37-12 (KLS+) - G37-8 (E)
| 1. Ignition switch ACC and shift lever in P
| Below 1 V
|
2. Ignition switch ACC and shift lever not in P (Within approx. 1 second)
| 7.5 to 11 V
|
3. Ignition switch ACC and shift lever not in P (After approx. 2 seconds)
| 6 to 9 V
|
G37-1 (IG) - G37-8 (E)
| Ignition switch ON
| 10 to 14 V
|
Ignition switch off
| Below 1 V
|
G37-8 (E) - Body ground
| Always
| Below 1 Ω
|
Text in Illustration*a
| Component with harness connected
(Shift Lock Control ECU)
|
If the result is not as specified, replace the transmission floor shift assembly.
