Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
A750F Automatic Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Transmission Wire -- Installation |
| 1. INSTALL TRANSMISSION WIRE |
Coat a new O-ring with ATF and install it to the transmission wire connector.
Install the transmission wire with the bolt.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
Connect the transmission wire connector.
- HINT:
- Push up the lever until the claw of the transmission wire connector makes a connection sound.
| 2. CONNECT TRANSMISSION WIRE |
Connect the 7 connectors to the solenoid valves.
Text in Illustration *1 Orange *2 Blue
 |
Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
- Torque:
- for bolt A:
- 10 N*m{102 kgf*cm, 7 ft.*lbf}
- for bolt B:
- 11 N*m{112 kgf*cm, 8 ft.*lbf}
- HINT:
- Each bolt length is indicated below.
- 12 mm (0.472 in.) for bolt A
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
Coat a new O-ring with ATF and install it to the oil strainer.
Install the oil strainer with the 4 bolts.
- Torque:
- 10 N*m{102 kgf*cm, 7 ft.*lbf}
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
- NOTICE:
- Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.
Install a new gasket and the oil pan with the 20 bolts.
- Torque:
- 7.0 N*m{71 kgf*cm, 62 in.*lbf}
| 5. INSTALL REAR NO. 1 ENGINE MOUNTING INSULATOR (for 1KD-FTV) |
Install the rear No. 1 engine mounting insulator to the transmission with the 4 bolts.
- Torque:
- 47 N*m{479 kgf*cm, 35 ft.*lbf}
| 6. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY (for 1KD-FTV) |
Install the No. 3 frame crossmember to the rear No. 1 engine mounting insulator with the 4 set bolts.
- Torque:
- 27 N*m{275 kgf*cm, 20 ft.*lbf}
Connect the ends of the No. 3 frame crossmember to the vehicle with the 4 bolts and 4 nuts.
- Torque:
- 50 N*m{510 kgf*cm, 37 ft.*lbf}
| 7. ADD AUTOMATIC TRANSMISSION FLUID |