Automatic Transmission System (For 1Kd-Ftv Without I-Art) Initialization

Drivetrain. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
A750F Automatic Transmission Transaxle. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. RESET MEMORY

Automatic Transmission System (For 1Kd-Ftv Without I-Art) -- Initialization



RESET MEMORY
NOTICE:
  1. Perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, valve body assembly or any of the shift solenoid valves.
  2. Reset Memory can be performed only with the intelligent tester.
HINT:
The TCM memorizes the control conditions of the automatic transmission assembly and engine assembly. Therefore, when the automatic transmission assembly, valve body assembly or any of the shift solenoid valves has been replaced, it is necessary to reset the memory so that the TCM can memorize the new information.
The reset procedure is as follows.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / ECT / Utility / Reset Memory.

    NOTICE:
    After performing Reset Memory, be sure to perform the Road Test (HILUX_TGN26 RM000000W790O3X.html) described earlier.
    HINT:
    The TCM learns through the road test.