Oil Level Sensor (W/ Dpf) Installation

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Kd-Ftv Lubrication. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. INSTALL ENGINE OIL LEVEL SENSOR

  2. ADD ENGINE OIL

  3. INSPECT FOR OIL LEAK

  4. INSPECT ENGINE OIL LEVEL

  5. INSTALL NO. 2 ENGINE UNDER COVER

Oil Level Sensor (W/ Dpf) -- Installation



1. INSTALL ENGINE OIL LEVEL SENSOR

  1. Install the engine oil level sensor with the 4 bolts.

    Torque:
    8.0 N*m{82 kgf*cm, 71 in.*lbf}

  1. Connect the engine oil level sensor connector.



2. ADD ENGINE OIL

  1. Add new engine oil.

    Standard Oil Grade:

    Item
    		Oil Grade
    		Oil Viscosity (SAE)
    w/o DPF
    		G-DLD1, API CF-4, CF or ACEA B1
    		- 5W-30
    - 10W-30
    - 15W-40
    - 20W-50
    w/ DPF
    		ACEA C2
    		- 0W-30
    - 5W-30

    Standard Capacity:

    Item
    		Specified Condition
    Drain and refill without oil filter change
    		6.6 liters (7.0 US qts, 5.8 Imp. qts)
    Drain and refill with oil filter change
    		6.9 liters (7.3 US qts, 6.1 Imp. qts)
    Dry fill
    		7.4 liters (7.8 US qts, 6.5 Imp. qts)

  1. Install the oil filler cap.



3. INSPECT FOR OIL LEAK

  1. Start the engine. Make sure that there are no oil leaks from the areas that were worked on.



4. INSPECT ENGINE OIL LEVEL

  1. Warm up the engine, stop the engine and wait 5 minutes. The engine oil level should be between the dipstick low level mark and full level mark.
    If low, check for leakage and add oil up to the full level mark.

    NOTICE:
    Do not fill engine oil above the full level mark.


5. INSTALL NO. 2 ENGINE UNDER COVER
Torque:
28 N*m{286 kgf*cm, 21 ft.*lbf}