Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fbe Fuel. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Fuel Pressure Pulsation Damper -- Installation |
| 1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY |
Apply a light coat of gasoline or spindle oil to the O-ring.
Text in Illustration *1 O-Ring
 |
Install the fuel pressure pulsation damper with the 2 bolts.
- Torque:
- 8.5 N*m{87 kgf*cm, 75 in.*lbf}
| 2. CONNECT NO. 1 FUEL HOSE |
Connect the No. 1 fuel hose (HILUX_TGN26 RM000000YL401NX.html).
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (HILUX_TGN26 RM000004QR3008X.html).
| 4. INSPECT FOR FUEL LEAK (for Fuel Main Tank) |
Make sure that there are no fuel leaks after performing maintenance on the fuel system.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the intelligent tester on.
- NOTICE:
- Do not start the engine.
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.
Check that there are no leaks from the fuel system.
If there are fuel leaks, repair or replace parts as necessary.Turn the ignition switch off.
Disconnect the intelligent tester from the DLC3.