Rear Crankshaft Oil Seal Removal

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fbe Engine Mechanical. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)

  2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

  3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle)

  4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

  5. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

  6. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

  7. REMOVE REAR CRANKSHAFT OIL SEAL

Rear Crankshaft Oil Seal -- Removal



1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY (for Manual Transmission)
(HILUX_TGN26 RM0000011B200RX.html)


2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)
  1. A343E:
    (HILUX_TGN26 RM0000010NV01SX.html)
  2. A343F:
    (HILUX_TGN26 RM0000010NV01MX.html)


3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transaxle)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fbe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Place matchmarks on the clutch cover and flywheel.

    Text in Illustration
    *1
    		Matchmark

  1. Loosen each set bolt one turn at a time until spring tension is released.

  1. Remove the 6 set bolts and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.


4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)
NOTICE:
Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.


5. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fbe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using SST, hold the crankshaft.

    SST
    09213-54015(91651-60855)
    09330-00021


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 10 bolts and flywheel.



6. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fbe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using SST, hold the crankshaft.

    SST
    09213-54015(91651-60855)
    09330-00021


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

  1. Remove the 10 bolts, rear drive plate spacer, drive plate and front drive plate spacer.



7. REMOVE REAR CRANKSHAFT OIL SEAL


    Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.2Tr-Fbe Engine Mechanical.Engine.Rear Crankshaft Oil Seal Removal

  1. Using a knife, cut off the lip of the oil seal.

    Text in Illustration
    *1
    		Cut Position
    *2
    		Protective Tape

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    1. Do not damage the surface of the oil seal press fit hole or the crankshaft.
    2. After removing the oil seal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.
    HINT:
    Tape the screwdriver tip before use.