Heated Oxygen Sensor Installation

Using SST, install the heated oxygen sensor.

SST

09224-00010

Torque:

for use without SST:

44 N*m{449 kgf*cm, 32 ft.*lbf}

for use with SST:

40 N*m{408 kgf*cm, 30 ft.*lbf}

HINT:

1. Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with a fulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification (HILUX_TGN26 RM000004QR1003X.html).
   
2. Make sure SST and the wrench are connected in a straight line.
   

Connect the heated oxygen sensor connector.