Dtc P0630 Vin Not Programmed Or Mismatch - Ecm / Pcm

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
2Tr-Fbe Engine Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

DESCRIPTION

INSPECTION PROCEDURE

READ OUTPUT DTC (CURRENT DTC)

INPUT VIN WITH INTELLIGENT TESTER

DTC P0630 VIN not Programmed or Mismatch - ECM / PCM


DESCRIPTION

DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM, or the input VIN is incorrect. The VIN is input with the intelligent tester.

DTC No.
DTC Detection Condition
Trouble Area
P0630
Either condition is met (1 trip detection logic):
  1. VIN is not stored in the ECM.
  2. Input VIN is incorrect.
ECM

INSPECTION PROCEDURE

1.READ OUTPUT DTC (CURRENT DTC)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch to ON and turn the intelligent tester on.

  1. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

  1. Read DTCs.

    Result
    Result
    		Proceed to
    DTC P0630 is output
    		A
    DTC P0630 and other DTCs are output
    		B

    HINT:
    If any DTCs other than P0630 are output, troubleshoot those DTCs first.
NOTICE:
If P0630 is stored, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the intelligent tester when the VIN is input. If DTCs other than P0630 are output, troubleshoot them first.


B
GO TO DTC CHART (HILUX_TGN26 RM000000PDF0EXX.html)
A


2.INPUT VIN WITH INTELLIGENT TESTER

  1. Refer to Registration (HILUX_TGN26 RM000000PDT09IX.html).


NEXT

END