Curtain Shield Airbag Assembly - Installation

Lexus IS250 IS220d GSE20 ALE20 - SUPPLEMENTAL RESTRAINT SYSTEM

CURTAIN SHIELD AIRBAG ASSEMBLY - INSTALLATION

  • HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY

Install the curtain shield airbag assembly with the 2 clips and 9 new bolts.

  • Torque:
  • 11 N*m{ 110 kgf*cm, 8 ft.*lbf}

Curtain Shield Airbag Assembly - Installation. SUPPLEMENTAL RESTRAINT SYSTEM. Lexus IS250 IS220d GSE20 ALE20

  • NOTICE:
  • Do not twist the curtain shield airbag assembly when installing it.

Connect the connector.

  • NOTICE:
  • When handling the airbag connector, take care not to damage the airbag wire harness.
2. INSTALL ROOF HEADLINING ASSEMBLY
  • HINT:
  • Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY" .
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION

Perform initialization .

  • HINT:
  • Some systems need initialization after reconnecting the cable to negative battery terminal.
5. INSPECT SRS WARNING LIGHT

Inspect the SRS warning light .