DRIVER SIDE KNEE AIRBAG ASSEMBLY - INSTALLATION

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

Connect the connector.

When handling the airbag connector, take care not to damage the airbag wire harness.

Install the driver side knee airbag assembly with the 4 bolts.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Connect the connectors.

Engage the 7 clips and install the lower instrument panel finish panel sub-assembly.

3. INSTALL NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Connect the connectors.

Insert the No. 1 instrument panel under cover sub-assembly into the guide as shown in the illustration.

Engage the 2 claws.

Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E-.

4. INSTALL INSTRUMENT SIDE PANEL

Engage the 5 claws and 3 clips, and then install the side instrument panel LH.

5. INSTALL FRONT DOOR OPENING TRIM COVER

Engage the 6 claws and install the front door opening trim cover LH.

6. INSTALL FRONT DOOR SCUFF PLATE (w/o Illumination)

Engage the 4 clips.

Engage the 7 claws, and install the front door scuff plate LH.

7. INSTALL FRONT DOOR SCUFF PLATE (w/ Illumination)

Connect the connector.

Engage the 4 clips.

Engage the 7 claws, and install the front door scuff plate LH.

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

9. PERFORM INITIALIZATION

Perform initialization .

Some systems need initialization after reconnecting the cable to the negative battery terminal.

10. INSPECT SRS WARNING LIGHT

Inspect the SRS warning light .

Driver Side Knee Airbag Assembly - Installation