Rear Spoiler (For Hatchback) Installation

Clean the attachment surface.

1. Using an infrared light, heat the double-sided adhesive tape remaining on the back door panel.
   

   Heating Temperature

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)

   CAUTION:

   Do not burn yourself on the hot back door panel or with the infrared light.

   NOTICE:

   Do not heat the back door panel excessively.

2. Using a piece of cloth, rub the remaining double-sided tape off the back door panel while it is hot from the infrared light.
   

   NOTICE:

   Installing the rear spoiler while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided adhesive tape.

3. Using a non-residue solvent, clean the attachment surface.
   

Engage the 4 clips and install a new rear spoiler.

Tighten the 2 screws.

Engage the 2 claws and install the rear spoiler cover.