Front Bumper (For Sedan) Removal
REMOVE FRONT SPOILER COVER (w/ Small Front Spoiler)
REMOVE FRONT BUMPER COVER (w/ Large Front Spoiler)
REMOVE FRONT BUMPER COVER (w/ Small Front Spoiler)
REMOVE FRONT BUMPER COVER (w/o Front Spoiler)
REMOVE FRONT BUMPER SIDE RETAINER LH
REMOVE FRONT BUMPER SIDE RETAINER RH
REMOVE FRONT BUMPER ENERGY ABSORBER LH (w/ Energy Absorber)
REMOVE FRONT BUMPER ENERGY ABSORBER RH (w/ Energy Absorber)
REMOVE RADIATOR SUPPORT UPPER ABSORBER
SEPARATE THERMISTOR ASSEMBLY (w/ Air Conditioning System)
REMOVE RADIATOR SIDE AIR SEAL LH (w/ Energy Absorber)
REMOVE RADIATOR SIDE AIR SEAL RH (w/ Energy Absorber)
REMOVE RADIATOR SIDE AIR SEAL LH (w/o Energy Absorber)
REMOVE RADIATOR SIDE AIR SEAL RH (w/o Energy Absorber)
REMOVE RADIATOR SUPPORT EXTENSION LH (w/ Energy Absorber)
REMOVE RADIATOR SUPPORT EXTENSION RH (w/ Energy Absorber)
DISCONNECT NO. 2 ENGINE ROOM WIRE (w/ Fog Light)
DISCONNECT NO. 2 ENGINE ROOM WIRE (w/o Fog Light)
REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
REMOVE FRONT BUMPER STONE DEFLECTOR BRACKET
REMOVE HEADLIGHT ASSEMBLY RH
REMOVE WINDSHIELD WASHER JAR ASSEMBLY
REMOVE FRONT BUMPER ARM SUB-ASSEMBLY LH
REMOVE FRONT BUMPER ARM SUB-ASSEMBLY RH
Front Bumper (For Sedan) -- Removal |
1. REMOVE FRONT SPOILER COVER (w/ Small Front Spoiler) |
Remove the 2 screws, the 10 bolts and the front spoiler cover.
2. REMOVE FRONT BUMPER COVER (w/ Large Front Spoiler) |
Apply protective tape, as shown in the illustration.
Remove the 9 bolts and the 7 screws.
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connector.
Remove the 2 clips, the screw grommet and the 6 spring nuts.
3. REMOVE FRONT BUMPER COVER (w/ Small Front Spoiler) |
Apply protective tape, as shown in the illustration.
Remove the 5 screws and the 3 bolts.
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connectors.
Remove the 2 clips, the screw grommet and the 10 spring nuts.
4. REMOVE FRONT BUMPER COVER (w/o Front Spoiler) |
Apply protective tape, as shown in the illustration.
Remove the 7 screws and the 3 bolts.
Remove the 2 screw grommets.
Remove the 6 clips.
Disengage the 6 claws and remove the front bumper cover.
Disconnect the connectors.
- HINT:
- If the vehicle is equipped with fog lights, disconnect the connectors.
Remove the 2 clips and the screw grommet.
5. REMOVE FRONT BUMPER SIDE RETAINER LH |
Remove the bolt and the screw.
Disengage the 2 claws and remove the front bumper side retainer.
6. REMOVE FRONT BUMPER SIDE RETAINER RH |
- HINT:
- Use the same procedure as for the LH side.
7. REMOVE FRONT BUMPER ENERGY ABSORBER LH (w/ Energy Absorber) |
Remove the front bumper energy absorber.
8. REMOVE FRONT BUMPER ENERGY ABSORBER RH (w/ Energy Absorber) |
- HINT:
- Use the same procedure as for the LH side.
9. REMOVE RADIATOR SUPPORT UPPER ABSORBER |
Using a screwdriver, disengage the 6 claws and remove the radiator support upper absorber.
10. SEPARATE THERMISTOR ASSEMBLY (w/ Air Conditioning System) |
Remove the 2 clamps and the thermistor.
11. REMOVE RADIATOR SIDE AIR SEAL LH (w/ Energy Absorber) |
Disengage the 2 claws and remove the radiator side air seal.
12. REMOVE RADIATOR SIDE AIR SEAL RH (w/ Energy Absorber) |
- HINT:
- Use the same procedure as for the LH side.
13. REMOVE RADIATOR SIDE AIR SEAL LH (w/o Energy Absorber) |
Disengage the 4 claws and remove the radiator side air seal.
14. REMOVE RADIATOR SIDE AIR SEAL RH (w/o Energy Absorber) |
- HINT:
- Use the same procedure as for the LH side.
15. REMOVE RADIATOR SUPPORT EXTENSION LH (w/ Energy Absorber) |
Disengage the 2 claws and remove the radiator extension.
16. REMOVE RADIATOR SUPPORT EXTENSION RH (w/ Energy Absorber) |
- HINT:
- Use the same procedure as for the LH side.
17. DISCONNECT NO. 2 ENGINE ROOM WIRE (w/ Fog Light) |
Using a clip remover, remove the 7 clamps and the No. 2 engine room wire.
18. DISCONNECT NO. 2 ENGINE ROOM WIRE (w/o Fog Light) |
Using a clip remover, remove the 6 clamps and the No. 2 engine room wire.
19. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
Remove the 6 bolts, 4 nuts and the front bumper reinforcement.
20. REMOVE FRONT BUMPER STONE DEFLECTOR BRACKET |
Remove the 2 nuts and the front bumper stone deflector bracket.
- HINT:
- Use the same procedure as for the opposite side.
21. REMOVE HEADLIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure as for the LH side (YARIS_NCP93 RM000000RJT01EX_02_0003.html).
22. REMOVE WINDSHIELD WASHER JAR ASSEMBLY |
Remove the 2 bolts and windshield washer jar.
23. REMOVE FRONT BUMPER ARM SUB-ASSEMBLY LH |
- HINT:
- Use the same procedure as for the LH side.
24. REMOVE FRONT BUMPER ARM SUB-ASSEMBLY RH |
Remove the 4 bolts and the front bumper arm.