Hazard Warning Switch (For Sedan) -- Installation |
| 1. INSTALL HAZARD WARNING SIGNAL SWITCH |
Engage the 3 claws and remove the hazard warning signal switch.
 |
| 2. INSTALL INSTRUMENT PANEL CENTER REGISTER |
Engage the 8 claws and the instrument panel center register.
 |
| 3. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (w/o Radio Receiver) |
 |
Engage the 2 claws and 4 clips and install the instrument cluster finish panel center.
| 4. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver) |
for Integrated with Panel:
Connect the plug.
Connect the 3 radio connectors.
Align the 2 bosses of the instrument panel with the hole in the radio bracket.
Engage the 4 clips and 4 claws and install the radio receiver.
Tighten the 4 bolts.
Connect the hazard warning signal switch connector.
 |
except Integrated with Panel:
Connect the plug.
Connect the 2 radio connectors.
Align the 2 bosses of the instrument panel with the hole in the radio bracket.
Install the radio receiver with the 4 bolts.
 |
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1 |
 |
Fit the 2 claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.
Engage the 5 claws and 5 clips and install the instrument cluster finish panel.
 |
| 6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
 |
Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.
| 7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
 |
Engage the 6 claws and 3 clips and install the instrument panel finish panel end RH.
| 8. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
 |
Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}