Hazard Warning Switch (For Sedan) -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
 |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH |
 |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.
| 4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
 |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
| 5. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 |
 |
Disengage the 7 claws and 5 clips and remove the instrument cluster finish panel.
| 6. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (w/o Radio Receiver) |
 |
Disengage the 2 claws and 4 clips and remove the instrument cluster panel center.
| 7. REMOVE RADIO RECEIVER ASSEMBLY (w/ Radio Receiver) |
for Integrated with Panel:
Disconnect the hazard warning signal switch connector.
Remove the 4 bolts.
Disengage the 4 clips and the 4 claws and remove the radio receiver.
Disconnect the plug.
Disconnect the 3 radio connectors.
 |
except Integrated with Panel:
Remove the 4 bolts and the radio receiver.
Disconnect the plug.
Disconnect the 2 radio connectors.
 |
| 8. REMOVE INSTRUMENT PANEL CENTER REGISTER |
Disengage the 8 claws and remove the instrument panel center register.
 |
| 9. REMOVE HAZARD WARNING SIGNAL SWITCH |
Disengage the 3 claws and remove the hazard warning signal switch.
 |